BUSINESS SCOPE
-
Water Pumps
-
Power Tools
-
Electronics
-
Accessories
QDX-T
This pump is designed to lift dirty water which is not chemically aggressive to the pump components. In all cases can suspended solids up to 30mm go through the channel. Recommended applications therefore include draining floods in confined areas such as basements and garages, and also pumping domestic waste and the disposal of waste water. Containing fibrous matter and is also widely used in many factories. These pumps are easy to install and dependable when used automatically in fixed installations. A purposely built pit with minimum dimensions 450*450*450mm is recommended for fixed installations, to provide total drainage and allow correct operation of the float switch. This system automatically starts the pump when the fluid reaches a preset level, and stops it once the fluid has been emptied. Installing a suitable non-return valve on the delivery pipe can prevent reverse flow when the pump stops.
Liquid Type: Clean water/Dirty water
Applications: Water supply systems, irrigation pumps, Commercial Buildings,Family homes, irrigation & aggriculture,Raw water intake, Industry utilities, water distribution,water treatment solution
Typology: Submersible
Family: Submersible pump
Flow rate up to 833.3 L/min (50 m³/h)
Head up to 32 m
Application Limits
5 m maximum immersion depth
Liquid temperature + 40 °C
Ambient temperature up to + 40 °C
Construction
Pump Body: Cast iron
Impeller: Aluminum or PPO
Motor Bracket: iron
Motor Shaft: Stainless steel
Mechanical Seal: Ceramic - graphite
Electric Motor: Single-phase 230V-50Hz with
condenser thermal overload protector built
into the copper winding
Insulation: Class B
Protection: IP X8
QDX-T
This pump is designed to lift dirty water which is not chemically aggressive to the pump components. In all cases can suspended solids up to 30mm go through the channel. Recommended applications therefore include draining floods in confined areas such as basements and garages, and also pumping domestic waste and the disposal of waste water. Containing fibrous matter and is also widely used in many factories. These pumps are easy to install and dependable when used automatically in fixed installations. A purposely built pit with minimum dimensions 450*450*450mm is recommended for fixed installations, to provide total drainage and allow correct operation of the float switch. This system automatically starts the pump when the fluid reaches a preset level, and stops it once the fluid has been emptied. Installing a suitable non-return valve on the delivery pipe can prevent reverse flow when the pump stops.
Liquid Type: Clean water/Dirty water
Applications: Water supply systems, irrigation pumps, Commercial Buildings,Family homes, irrigation & aggriculture,Raw water intake, Industry utilities, water distribution,water treatment solution
Typology: Submersible
Family: Submersible pump
Flow rate up to 833.3 L/min (50 m³/h)
Head up to 32 m
Application Limits
5 m maximum immersion depth
Liquid temperature + 40 °C
Ambient temperature up to + 40 °C
Construction
Pump Body: Cast iron
Impeller: Aluminum or PPO
Motor Bracket: iron
Motor Shaft: Stainless steel
Mechanical Seal: Ceramic - graphite
Electric Motor: Single-phase 230V-50Hz with
condenser thermal overload protector built
into the copper winding
Insulation: Class B
Protection: IP X8