BUSINESS SCOPE
-
Water Pumps
-
Power Tools
-
Electronics
-
Accessories
QB
They are recommended for pumping clean water without abrasive particles, and liquids that are chemically non
aggressive for the materials of which the pump is made. As a result of their reliability and the fact that they are
easy to use and are economical, these pumps are suitable for domestic use and in particular for distribution
water in combination with small pressure sets and for the irrigation of gardens and allotments. The pumps
should be installed in enclosed environment, or at least sheltered from inclement weather.
Liquid Type: Clean water
Applications: Water supply systems, pressure systems, irrigation pumps
Typology: Surface
Family: Peripheral
Flow rate up to 83 L/min (5 m³/h)
Head up to 78 m
Application Limits
Manometric suction lift up to 8 m
Liquid temperature up to + 40°C
Ambient temperature up to + 40 °C
Construction
Pump Body: Cast iron.
Impeller: Brass, with radial peripheral vanes.
Motor Shaft: 304 stainless steel shaft.
Mechanical Seal: Ceramic- graphite.
Electric Motor: Single- phase 230V- 50Hz with.
condenser and thermal overload protector built
into the copper winding.
Insulation: Class B.
Protection: IP 44.
QB
They are recommended for pumping clean water without abrasive particles, and liquids that are chemically non
aggressive for the materials of which the pump is made. As a result of their reliability and the fact that they are
easy to use and are economical, these pumps are suitable for domestic use and in particular for distribution
water in combination with small pressure sets and for the irrigation of gardens and allotments. The pumps
should be installed in enclosed environment, or at least sheltered from inclement weather.
Liquid Type: Clean water
Applications: Water supply systems, pressure systems, irrigation pumps
Typology: Surface
Family: Peripheral
Flow rate up to 83 L/min (5 m³/h)
Head up to 78 m
Application Limits
Manometric suction lift up to 8 m
Liquid temperature up to + 40°C
Ambient temperature up to + 40 °C
Construction
Pump Body: Cast iron.
Impeller: Brass, with radial peripheral vanes.
Motor Shaft: 304 stainless steel shaft.
Mechanical Seal: Ceramic- graphite.
Electric Motor: Single- phase 230V- 50Hz with.
condenser and thermal overload protector built
into the copper winding.
Insulation: Class B.
Protection: IP 44.