BUSINESS SCOPE
-
Water Pumps
-
Power Tools
-
Electronics
-
Accessories
GS
GS is stainless steel horizontal single- stage centrifugal pump, it is a versatile product with a wide range of applications. It can transport various medium, including water or industrial liquids, adapted to different temperature, flow rate and pressure range.This series can be used to supply and move water in cooling, heating, circulating, swimming pool and condition systems, as well as fire fighting, irrigation, civil, industrial and agricultural applications. The pumps should be installed in enclosed environment, or at least sheltered from inclement weather.
Liquid Type: Clean water
Typology: Surface
Family: Centrifugal
Flow rate up to 25000 L/min (1500 m³/h)
Head up to 164 m
Application Limits
Manometric suction lift up to 7 m
Liquid temperature - 20℃~ + 100℃
Ambient temperature up to + 40℃
Maximum Pressure: 10 Bar
Construction
Pump Body: cast iron.
Impeller: Stainless steel or cast iron.
Motor Shaft: stainless steel .
Mechanical Seal: Ceramic steatite.
Electric Motor: Single- phase 230V- 50Hz with
condenser and thermal overload protector built
into the copper winding; Three-phase 380/ 400V50Hz.
Insulation: Class F.
Protection: IP 55.
GS
GS is stainless steel horizontal single- stage centrifugal pump, it is a versatile product with a wide range of applications. It can transport various medium, including water or industrial liquids, adapted to different temperature, flow rate and pressure range.This series can be used to supply and move water in cooling, heating, circulating, swimming pool and condition systems, as well as fire fighting, irrigation, civil, industrial and agricultural applications. The pumps should be installed in enclosed environment, or at least sheltered from inclement weather.
Liquid Type: Clean water
Typology: Surface
Family: Centrifugal
Flow rate up to 25000 L/min (1500 m³/h)
Head up to 164 m
Application Limits
Manometric suction lift up to 7 m
Liquid temperature - 20℃~ + 100℃
Ambient temperature up to + 40℃
Maximum Pressure: 10 Bar
Construction
Pump Body: cast iron.
Impeller: Stainless steel or cast iron.
Motor Shaft: stainless steel .
Mechanical Seal: Ceramic steatite.
Electric Motor: Single- phase 230V- 50Hz with
condenser and thermal overload protector built
into the copper winding; Three-phase 380/ 400V50Hz.
Insulation: Class F.
Protection: IP 55.
© GRANDFAR GROUP. All rights reserved.