BUSINESS SCOPE
-
Water Pumps
-
Power Tools
-
Electronics
-
Accessories
GFM
They are recommended for pumping clean water without abrasive particles, and liquids that are chemically non aggressive for the materials of which the pump is made. This series can be used to supply and move water in cooling, heating, circulating and conditioning systems, as well as fire fighting, irrigation, civil, industrial and agricultural applications. The realisation according to standard EN733- DIN24255 ensure that the dimensions comply with those standards. The constructive from allows the pump body moved without disconnecting it from the pipes. The pumps should be installed in enclosed environment, or at least sheltered from inclement weather.
Liquid Type: Clean water
Typology: Surface
Family: Centrifugal
Flow rate up to 10000 L/min (600 m³/h)
Head up to 151 m
Application Limits
Manometric suction lift up to 7 m
Liquid temperature up to + 90℃
Ambient temperature up to + 40℃
Max. withstand pressure 16 bar
Construction
Pump Body: Cast iron, dimensions according to
standards EN733- DIN24255 and UNI 7467- NF
E- 44- 111, with flanged suction and delivery
inlets and threaded steel counter flanges.
Impeller: Stainless steel or cast iron.
Motor Shaft: stainless steel .
Mechanical Seal: Ceramic- graphite.
Electric Motor: GFm: Single- phase 230V- 50Hz
with condenser and thermal overload protector
built into the copper winding. GF: Three- phase
380/ 400V- 50Hz.
Insulation: Class F.
Protection: IP 55.
GFM
They are recommended for pumping clean water without abrasive particles, and liquids that are chemically non aggressive for the materials of which the pump is made. This series can be used to supply and move water in cooling, heating, circulating and conditioning systems, as well as fire fighting, irrigation, civil, industrial and agricultural applications. The realisation according to standard EN733- DIN24255 ensure that the dimensions comply with those standards. The constructive from allows the pump body moved without disconnecting it from the pipes. The pumps should be installed in enclosed environment, or at least sheltered from inclement weather.
Liquid Type: Clean water
Typology: Surface
Family: Centrifugal
Flow rate up to 10000 L/min (600 m³/h)
Head up to 151 m
Application Limits
Manometric suction lift up to 7 m
Liquid temperature up to + 90℃
Ambient temperature up to + 40℃
Max. withstand pressure 16 bar
Construction
Pump Body: Cast iron, dimensions according to
standards EN733- DIN24255 and UNI 7467- NF
E- 44- 111, with flanged suction and delivery
inlets and threaded steel counter flanges.
Impeller: Stainless steel or cast iron.
Motor Shaft: stainless steel .
Mechanical Seal: Ceramic- graphite.
Electric Motor: GFm: Single- phase 230V- 50Hz
with condenser and thermal overload protector
built into the copper winding. GF: Three- phase
380/ 400V- 50Hz.
Insulation: Class F.
Protection: IP 55.
© GRANDFAR GROUP. All rights reserved.