BUSINESS SCOPE
-
Water Pumps
-
Power Tools
-
Electronics
-
Accessories
CPm130-200
They are recommended for pumping clean water without abrasive particles, and liquids that are chemically non
aggressive for the materials of which the pump is made. As a result of their reliability and the fact that they are
easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in
combination with small and medium sized pressure sets, for transferring liquids and for the irrigation of gardens
and allotments. The pumps should be installed in enclosed environment, or at least sheltered from inclement weather.
Liquid Type: Clean water
Typology: Surface
Family: Centrifugal
Flow rate up to 133 L/min (8 m³/h)
Head up to 48 m
Application Limits
Manometric suction lift up to 7 m
Liquid temperature up to +40℃
Ambient temperature up to +40℃
Construction
Pump Body: Cast iron
Impeller: Brass or stainless steel
Motor Shaft: 304 stainless steel shaft
Mechanical Seal: Ceramic - graphite.
Electric Motor: Cpm:Single-phase 230V-50Hz
with condenser and thermal overload protector
built into the copper winding.Cp:three-phase 380/400V-50Hz.
Insulation: Class B.
Protection: IP 44.
CPm130-200
They are recommended for pumping clean water without abrasive particles, and liquids that are chemically non
aggressive for the materials of which the pump is made. As a result of their reliability and the fact that they are
easy to use, these pumps are widely used in domestic and civil applications such as the distribution of water in
combination with small and medium sized pressure sets, for transferring liquids and for the irrigation of gardens
and allotments. The pumps should be installed in enclosed environment, or at least sheltered from inclement weather.
Liquid Type: Clean water
Typology: Surface
Family: Centrifugal
Flow rate up to 133 L/min (8 m³/h)
Head up to 48 m
Application Limits
Manometric suction lift up to 7 m
Liquid temperature up to +40℃
Ambient temperature up to +40℃
Construction
Pump Body: Cast iron
Impeller: Brass or stainless steel
Motor Shaft: 304 stainless steel shaft
Mechanical Seal: Ceramic - graphite.
Electric Motor: Cpm:Single-phase 230V-50Hz
with condenser and thermal overload protector
built into the copper winding.Cp:three-phase 380/400V-50Hz.
Insulation: Class B.
Protection: IP 44.
© GRANDFAR GROUP. All rights reserved.