Water Pump_Page Banner

BUSINESS SCOPE

4SDM

Category:
Deep Well Pump
We could not find any corresponding parameters, please add them to the properties table
Product serial number
Installation and use:

This series of electric pumps has a multi-stage impeller structure with a high head and wide application. It is suitable for pumping water in boreholes, ponds and lakes, lawn irrigation, domestic tap water, swimming pool filling, water tower and cistern delivery, fountains, agricultural drainage and irrigation, etc.

Features:
Quantity
-
+
Stock:
0
Application Range
Performance Parameter
Components
Dimensions
Package

Flow rate up to 483 L/min (29 m³/h)

Head up to 443 m

 

Application Limits

Medium temperature does not exceed +40°C;
Medium PH values between 6.5 and 8.5;
The volume ratio of solid impurities in the medium 
is not more than 0.1%, and the particle size is not 
more than 0.2mm;
Diving depth does not exceed 70 meters;
Min. applicable well diameter: 4”

 

Construction

Pump External Casing: Stainless steel
Impeller: POM
Diffuser: PC
Motor Shaft: Stainless steel 
Mechanical Seal: Ceramic - graphite or Sic to graphite 
Electric Motor:  Oil filled rewindable motors(non- toxic
oil for use with food). Single- phase 220V/ 240V- 50Hz with
condenser thermal overload protector built into the copper
winding, equipped with start control box. Three- phase 380V/ 415V
Insulation: Class B  
Protection: IP X8 

*:  1- phase pump can be selected with control box (SDM) or without control box(SEM).

*:  The Outlet/Connection can be made by brass/stainless steel/cast iron.

*:  The diffuser will assembled with stainless steel when pump power above 2.2kw.

*:  The diffuser will assembled with stainless steel when pump power above 3kw.

*:  The diffuser will assembled with stainless steel when pump power above 5.5kw.

Previous

Featured Products

4SDM

Category:
Deep Well Pump
We could not find any corresponding parameters, please add them to the properties table
Product serial number
Installation and use:

This series of electric pumps has a multi-stage impeller structure with a high head and wide application. It is suitable for pumping water in boreholes, ponds and lakes, lawn irrigation, domestic tap water, swimming pool filling, water tower and cistern delivery, fountains, agricultural drainage and irrigation, etc.

Features:
Quantity
-
+
Stock:
0
Application Range
Performance Parameter
Components
Dimensions
Package

Flow rate up to 483 L/min (29 m³/h)

Head up to 443 m

 

Application Limits

Medium temperature does not exceed +40°C;
Medium PH values between 6.5 and 8.5;
The volume ratio of solid impurities in the medium 
is not more than 0.1%, and the particle size is not 
more than 0.2mm;
Diving depth does not exceed 70 meters;
Min. applicable well diameter: 4”

 

Construction

Pump External Casing: Stainless steel
Impeller: POM
Diffuser: PC
Motor Shaft: Stainless steel 
Mechanical Seal: Ceramic - graphite or Sic to graphite 
Electric Motor:  Oil filled rewindable motors(non- toxic
oil for use with food). Single- phase 220V/ 240V- 50Hz with
condenser thermal overload protector built into the copper
winding, equipped with start control box. Three- phase 380V/ 415V
Insulation: Class B  
Protection: IP X8 

*:  1- phase pump can be selected with control box (SDM) or without control box(SEM).

*:  The Outlet/Connection can be made by brass/stainless steel/cast iron.

*:  The diffuser will assembled with stainless steel when pump power above 2.2kw.

*:  The diffuser will assembled with stainless steel when pump power above 3kw.

*:  The diffuser will assembled with stainless steel when pump power above 5.5kw.

Previous

Featured Products

Username used for comment:
Email list
Description:

 

© GRANDFAR GROUP. All rights reserved.

Please select your language

Français

Deutsch

中文简体

Español

русский язык 

Username used for comment:
Customer message
Description:
验证码